Reliable Sensor Velocity v200 Bedienerhandbuch PDF herunterladen (Seite 12)

TEMPERATURE SELECTION

The V200 has 4 temperature positions for you to choose between, by turning the

selector (3).

Turn the temperature selector (3) as many times as required until the desired

temperature level is reached (g. 2). Position (•MIN) (g. 2-A) Position (••) (g.

2-B) Position (•••) (g. 2-C) Position (MAX) (g. 2-D)

After turning the temperature selector (3) from the OFF position to any other

temperature position, the three luminous indicators will light up for a few seconds

and a beep will sound.

The temperature indicator will icker until the temperature selected has been

reached. Once the working temperature has been reached, the indicator will light

up continuously (g. 2).

STEAM SELECTION

The V200 has two steam positions; medium steam and maximum steam. To

select the desired steam level:

1. Press the button (5) to select medium steam (g. 3) or the button (6) for

maximum steam (g. 4).

If the steam function is selected without having reached the temperature

selected, the luminous indicator on the steam button selected (medium

or maximum ) will icker until the working temperature is reached (g. 5).

Once the temperature is reached, the luminous indicator of the temperature

selected •MIN, ••, ••• or MAX and the LIGHT indicator of the steam button

selected (medium or maximum ) will no longer icker simultaneously.

2. To stop the emission of steam, press the steam button again. A beep will

sound, the corresponding luminous indicator will switch off (medium or

maximum ) and steam will no longer be emitted automatically (g. 6).

CONTACT SENSOR

The V200 has a contact sensor which stops the emission of steam immediately

after detecting lack of contact on the handle. This ensures lower power consump-

tion as well as lower water consumption. The steam function switches back on

automatically when hand contact with the handle is made.

AUTO SWITCH OFF: AUTO-PAUSE

The V200 has an automatic switch off system.

It is switched off automatically 8 minutes after the last time it was used. This

means that once the device is activated, the V200 no longer heats up and begins

to cool down.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Keine Kommentare

Reliable Sensor Velocity v200 Bedienerhandbuch Seite 12